Monitor And Spot Check The Performance Of Your Desiccant Style Drying Equipment
Dew Point Range: -40°F to +30°F (-40°C to -1.1°C)
- Establish a repeatable, controlled drying process
- Alerts you to potential problems with desiccant style material dryers
- Verify the accuracy of your material dryers built-in Dew Point Meter (if equipped)
- Built-in Self Test
- Manufactured using NIST*-traceable equipment
- Available with current calibration certificate / Can be recalibrated
- Monitor case is compact, lockable, self-contained and portable
- Adjustable alarm set points and changeable temp. display (F to C)
*National Institute of Standards and Technology
How They Work
The meter draws a dried-air sample from the dryer output. The sample’s moisture level affects the electrical resistance of the meter’s hygrosensor. By reading that resistance, the meter can give the Dew Point Temperature — the drier the air, the lower the dew point.
Specifications
The sampling tubing supplied with the monitor can tolerate temperatures up to 275˚F (135˚C). Higher process air temperatures can be cooled to a safe level by sampling through a few feet of ¼” copper tubing.
- Sample Air Temperature Limits: Up to 500°F
- Dew Point Range: -40° to +30°F (-40° to -1.1°C)
- Typical Accuracy: ±3°F (1.7°C)
- Alarm Set Point: -10°F (-23˚C)
- Sensor Item #: 172054
- Analog Output Scaling: -40°F to +70°F (-4˚C to -9˚C)
- Power Requirements: 115VAC 50/60HZ / 0.15A max
(230VAC optional) - Dimensions: 10.75” x 9.75” x 4.75”
- Shipping Weight: 7 lbs.
IMS Company Blog 
Leave a comment